Skip to Content
Repair
Vaillant Fault code Vaillant
F.37

Fan off target or faulty

Breakdown: the boiler is stopped

During operation, the fan runs too fast or too slow compared with its target (ecoVIT VKK, ecoCOMPACT VSC); on the ecoVIT VKK /5, the boiler switches to emergency mode after a passing problem in the air circuit. It is a fault: the boiler no longer works normally and needs a technician. On an aroTHERM heat pump VWL 55/2 A to 155/2 A or VWL 55/3 A and 85/3 A, F.37 reports a fault of the outdoor unit's fan: air duct blocked, fan motor faulty or not connected, or the link between the main circuit board and the fan circuit board broken; here too our technician needs to step in.

What you can do

  1. Write down the code shown and the boiler or heat pump model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show F.37?

Repair visit: 360 € excl. VAT (381.60 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

Vaillant

Choose a recognised installer

Ecowatt is a Vaillant installer: our group is on Vaillant's official list of installers.

The variants of code F.37

The meaning depends on the boiler: find yours below.

F.037

Fan error

Breakdown: the boiler is stopped aroTHERM VWL ../2 A, ../3 A
F.37

Fault Fan speed deviation

Breakdown: the boiler is stopped VKK /4
F.37

Emergency mode, minimum speed increased

Breakdown: the boiler is stopped VKK /5
F.37

Fan speed too high or too low during operation

Breakdown: the boiler is stopped VSC /2

What our technician checks

  • The fan connector and wiring harness
  • The pressure sensor
  • The fan and the circuit board
  • ecoVIT VKK /5: the air circuit
  • aroTHERM VWL ../2 A, ../3 A: the unit's air duct, free of obstacles
  • aroTHERM VWL ../2 A, ../3 A: the fan motor and its connection
  • aroTHERM VWL ../2 A, ../3 A: the link between the main circuit board and the fan circuit board

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.