Skip to Content

Reversible air conditioning

One appliance, four seasons.

A reversible air conditioner is an air-to-air heat pump: it cools, heats and dehumidifies your home with one appliance. Efficient, quiet and comfortable all year round.

4×

more heat than the electricity it uses, at best, in heating mode

-15 °C

outside, and it still heats

20 dB(A)

about, in silent mode: quieter than a whisper

1 day

to install a mono-split, usually

A house cut open: the outdoor unit beside the wall, the refrigerant lines and three indoor units, in the living room and the bedrooms.

How it works

An outdoor unit and one or more indoor units exchange heat, like a fridge in reverse.

1

The outdoor unit exchanges heat with the air

In summer it releases outside the heat taken from your rooms. In heating mode it captures heat from the outdoor air, down to -15 °C.

2

Refrigerant lines carry it

Two insulated copper lines link the outdoor unit to each indoor unit, through the wall.

3

The indoor unit treats the air of the room

No water circuit as with an air-to-water heat pump: the air is cooled or heated directly, so the installation is simpler and faster.

4

Inverter adjusts the power

The power varies continuously instead of switching on and off: quieter and more economical. The unit also filters and dehumidifies the air.

Is it right for my home?

What it brings

  • Cool in summer and heat in spring and autumn, with one appliance
  • Energy label up to A+++ and an ecological R32 refrigerant
  • Quiet: around 20 dB(A) in silent mode, fine for a bedroom
  • Filtered, dehumidified air: a pleasant indoor climate

What we check at the visit

  • Mono-split or multi-split: how many rooms, and the right power for each.
  • The place of the outdoor unit: level, parallel to the wall, at least 20 cm from it.
  • A permit is rarely needed; in an apartment or on a protected facade, rules may apply to the outdoor unit.
  • In heating it is a complement: to heat the whole house and the hot water, an air-to-water heat pump.

Request a free visit

What we install

Our range

Bosch Climate sets: wall-mounted indoor units, Inverter, R32 refrigerant. Other brands when your project calls for them.

Bosch Climate 6000i
Mono-split

Bosch Climate 6000i

Cooling power2.6 to 7 kW
RoomsOne
Class, cooling / heatingUp to A+++ / A++
RefrigerantR32
Bosch Climate 3000i
Mono-split

Bosch Climate 3000i

Cooling power2.6 to 7 kW
RoomsOne
Class, cooling / heatingA++ / A+
RefrigerantR32
Bosch Climate 5000 Multi Split
Multi-split

Bosch Climate 5000 Multi Split

Cooling power5.3 to 10.6 kW
RoomsTwo or more
Class, cooling / heatingA++ / A+
RefrigerantR32

Your project in four steps

1

Free visit and advice

Within 7 days. We look at your rooms and advise mono-split or multi-split and the right power.

2

Quote

A clear quote without commitment, with the best place for the indoor and outdoor units.

3

Installation by our team

Indoor and outdoor units, refrigerant lines and electrical connection, cleanly. A mono-split usually in one day.

4

Start-up and follow-up

Refrigerant charge and tests by a technician certified by the manufacturer: the manufacturer's warranty is kept. Then we remain your contact.

Frequently asked questions

Does air conditioning use a lot of electricity?

No. A modern air conditioner is an air-to-air heat pump with an energy label up to A+++. In heating mode it delivers up to about 4 times more heat than the electricity it uses.

Does it heat too?

Yes. A reversible air conditioner cools in summer and heats efficiently down to -15 °C outside. Ideal in spring and autumn.

Mono-split or multi-split: what is the difference?

A mono-split has one indoor unit on one outdoor unit: ideal for one room. A multi-split links several indoor units (up to 5) to one outdoor unit: ideal for several rooms or the whole house.

Who does the installation and the start-up?

We install the units, the refrigerant lines and the electrical connection. The start-up (refrigerant charge and tests) is done by a technician certified by the manufacturer: you keep the manufacturer's warranty.

Is it quiet?

Very. Modern indoor units reach a silent mode of about 20 dB(A), quieter than a whisper. Fine for a bedroom.

How long does the installation take?

A mono-split is usually installed in one day. A multi-split takes a little longer, depending on the number of rooms.

Do I need a permit?

For most homes, no. In an apartment or on a protected facade, rules may apply to the outdoor unit. We check it together at the visit.

Am I entitled to 6 % VAT?

In a home over 10 years old, the reduced 6 % VAT usually applies to the installation. We apply it correctly on your quote.

A project for your home?

Free visit within 7 days, no commitment.

Request a free visit

A building or a business?

Co-ownerships, offices, schools: one point of contact from the study to the maintenance.

Learn more