Water treatment
Hard water has two answers.
Hard water damages your appliances and your pipes. There are two good answers, and they do not do the same thing: we tell you which one suits your water and what you expect.
good answers, which do not do the same thing
of salt with SoluCalc, and no discharge
a year, about: the CO2 refill of a household
flats protected by one 2-inch unit, for example

How it works
One unit right after the water meter treats all the water of the house.
We measure your water
The hardness first. Red water or deposits in the bath or washbasin? Your installation is corroding: we check it for free.
One unit after the meter
Installed right after the water meter, it protects the whole house: boiler, pipes, taps and appliances.
SoluCalc: the limescale stays dissolved
Food-grade CO2 keeps the limescale dissolved instead of depositing. Calcium and magnesium stay in your drinking water.
Softener: the water becomes soft
By ion exchange, calcium is replaced by sodium: truly soft water, less soap, no traces.
Which one for my water?
SoluCalc, salt-free: for you if
- you want to protect the boiler, the pipes and the appliances from limescale
- you want no salt to carry, no regeneration and no discharge
- you want to keep calcium and magnesium in your drinking water
- you accept water that is not softened: the limescale stays in it, but no longer sticks
A salt softener: for you if
- your water is very hard
- you want to feel soft water: less soap, no traces on taps, glass and shower wall
- you accept salt refills and regular maintenance
- you keep one tap of untreated water for drinking, as we advise
What we install
Our range
From one home to a whole building. Also: prefilter, anti-corrosion treatment of the heating circuit, filtration and pressure boosting.

SoluCalc 1″

SoluCalc 2″

Vercalo
Your project in four steps
Free visit and measurement
We measure the hardness of your water and check for corrosion.
Advice and quote
The treatment that suits your water and what you expect, in a clear quote.
Installation
By our own technicians. A SoluCalc takes about 2 hours.
Follow-up
CO2 refill or salt and maintenance: the same team follows your installation.
Frequently asked questions
What is the difference between SoluCalc and a softener?
SoluCalc keeps the limescale dissolved with food-grade CO2: it no longer sticks, but the water is not softened. A softener replaces the calcium with sodium: the water becomes truly soft.
Can I still drink the water?
With SoluCalc, calcium and magnesium stay in your drinking water. With a softener, we advise keeping one tap of untreated water for drinking.
What maintenance?
SoluCalc: refill the CO2 cylinder, about once a year for a household; no regeneration. A softener: salt refills and regular maintenance.
Does it protect my boiler?
Yes, both protect the appliances. The efficacy of SoluCalc is verified up to 95 °C: boiler, hot water tank and exchangers.
And for a whole building?
SoluCalc 2 inch handles up to 20 m³/h: one unit can protect, for example, 17 flats.
My water is red, or leaves deposits: is that limescale?
No: your installation is corroding. We check it for free and propose what fits: filter, anti-corrosion treatment, pipes to replace.
How long does the installation take?
A SoluCalc, about 2 hours. A softener depends on the room available and the pipes to adapt: we tell you at the visit.
A building or a business?
Co-ownerships, offices, industry: one unit can protect a whole building.
Learn more

