Skip to Content

Infrared thermography

See the problem while it is still cheap.

An infrared image shows what a visual inspection cannot: a pipe behind a wall, a bad contact, a leak that is not visible yet.

4

uses: a leak, insulation, overheating, planned maintenance

0

contact: the camera reads temperatures from a distance

°C

differences made visible, in colour

Before

the breakdown: maintenance planned, not suffered

A house as a thermal camera sees it: heat escaping around the windows and at the roof, a hot pipe in a wall, a hot spot in the electrical board.

What the camera sees

Thermography detects thermal trends and temperature differences in installations and buildings.

1

Everything gives off heat

Every surface sends out infrared light, invisible to the eye, the stronger the warmer it is.

2

The camera turns it into an image

Each temperature gets a colour: warm in yellow and red, cold in blue and purple.

3

We read the differences

A pipe behind a wall, a bad contact that heats up, missing or damaged insulation, a leak not yet visible.

4

You plan

The repair at a scheduled shutdown or when the budget allows, before the breakdown.

What we use it for

What it brings

  • The cause of a water leak located without breaking everything open
  • Missing or damaged insulation spotted in a building
  • Overheating spotted before it becomes a breakdown
  • Maintenance planned at a scheduled shutdown or when the budget allows

Good to know

  • The camera sees surfaces, not through walls: a hot pipe shows by the heat it gives to the plaster around it.
  • To see heat losses, it needs a difference between inside and outside: winter is the right season.
  • An installation is read while it runs: a contact heats up under load.

Request a free visit

Installations

What we use

The thermal camera

One tool, three fields: the installation, the building, the hidden leak.

Installations

Before the breakdown

A bad contact or a part overheating shows before it fails: the repair is planned.

Buildings

Insulation

Missing or damaged insulation, heat escaping around the windows and at the roof.

Leaks

Without breaking everything

A hot-water or heating pipe that leaks behind a wall or under a floor.

Your thermography in four steps

1

Free visit

Tell us what worries you: a leak, a cold room, an installation.

2

The images

Our technician takes thermal images, with the installation running.

3

The reading

We show you what the images reveal and what it means.

4

The plan

Repair now, or plan it at a shutdown or when the budget allows.

Frequently asked questions

What is thermography?

An infrared camera measures surface temperatures and shows them as a colour image. The differences reveal what a visual inspection cannot.

Can it find a leak?

Often: a hot-water or heating pipe that leaks warms the surface around it. For other leaks, we combine it with tracer gas and acoustics.

When is the best time?

For a building, in winter with the heating on: the difference between inside and outside shows the losses. For an installation, while it runs.

Does it replace maintenance?

No, it completes it: it shows where to act, so maintenance is planned at a shutdown or when the budget allows, instead of being suffered.

A doubt about your home?

A leak you cannot find, a cold room, an installation that heats up: we come and look.

Request a free visit

A building or a business?

Co-ownerships, offices, schools: boiler rooms and installations read before the breakdown.

Learn more