Skip to Content
Repair
Vaillant Fault code Vaillant
F.11

Return temperature sensor short circuit

Breakdown: the boiler is stopped

The return temperature sensor, which measures the water coming back from the heating, is short-circuited: the boiler reads an impossible value, because of the sensor itself or a cable touching earth. It is a fault code: the boiler no longer works normally and needs a technician. On an aroTHERM VWL ..5/8.1 A Q or aroTHERM perform heat pump (VWZ AI /8 iQ module), F.011 likewise reports that the return temperature sensor is short-circuited, because of its electrical connection or a faulty sensor; here too our technician needs to step in.

What you can do

  1. Write down the code shown and the boiler or heat pump model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show F.11?

Repair visit: 360 € excl. VAT (381.60 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

Vaillant

Choose a recognised installer

Ecowatt is a Vaillant installer: our group is on Vaillant's official list of installers.

The variants of code F.11

The meaning depends on the boiler: find yours below.

F.011

The return temperature sensor is short-circuited.

Breakdown: the boiler is stopped VCW CS/1-5, VCW CS/1-7, aroTHERM VWL ../8.1 A Q
F.11

Return temperature sensor short circuit

Breakdown: the boiler is stopped VC 486/5-5, VC 806/5-5, VCC /4, VCW /3, VCW /5-3, VCW /5-5, VUW /3-5, VUW /4-5
F.11

Short circuit of the return temperature sensor

Breakdown: the boiler is stopped VC /4-5, VUW /5-5
F.11

Return sensor short circuit

Breakdown: the boiler is stopped VC /8-5, VCW /5-7
F.11

Heating return NTC sensor short circuit (> 130 °C)

Breakdown: the boiler is stopped VSC /2

The boilers that show this code

What our technician checks

  • The return temperature sensor, replaced if needed
  • The sensor cable and its connectors
  • The wiring harness, for a short circuit, including against the casing
  • The circuit board

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.