Flow and return difference too large
Blocking: it retries by itself
The temperature difference between the water leaving the boiler (flow) and the water coming back (return) is too large. This is not a lockout: the boiler starts again by itself as soon as the cause is gone.
What you can do
- Write down the code shown, the number next to it if there is one, and the boiler model (on the rating plate).
- Check the water pressure: at least 1 bar, or the needle in the green zone of the pressure gauge. Too low? Top up with the boiler cold, the way your installer showed you.
- Check that enough radiators are open.
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show 349?
Repair visit: 360 € excl. VAT (381.60 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
Choose a real expert
Ecowatt is an approved Buderus System Partner: factory training in Germany, direct access to spare parts, one contact.
The variants of code 349
The meaning depends on the boiler: find yours below.
Difference between flow and return temperatures too large
The boilers that show this code
What our technician checks
- The shutoff valves, open
- The water pressure: topped up and vented if it is too low
- An open thermostatic valve
- The flow and return temperature sensors, replaced if needed
- The pump, replaced if needed