213
The temperature is rising too fast
Information: nothing to do
The flow or return temperature sensors measure a temperature rise that is too fast. To check: the pressure and venting, the water circulation and an output suited to the system.
What you can do
- Write down the code shown, the number next to it if there is one, and the boiler model (on the rating plate).
- Check that enough radiators are open.
- Bleed the radiators, then check the water pressure again.
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
Nothing to do
This message belongs to the boiler's normal operation.
Call usChoose a real expert
Ecowatt is an approved Buderus System Partner: factory training in Germany, direct access to spare parts, one contact.
The variants of code 213
The meaning depends on the boiler: find yours below.
213
The flow or return temperature sensor measures a temperature rise that is too fast
Information: nothing to do
GB192i
The boilers that show this code
What our technician checks
- The water pressure, and venting of the boiler and the system
- The water flow rate in the system
- The boiler output, set according to the size of the system
- The wiring of the pump and the sensor involved; replaced if needed