212
Temperature rising too fast
Information: nothing to do
The flow or safety temperature sensors measure a temperature rise that is too fast. The GB192i lists this code among operating messages, not among faults.
What you can do
- Write down the code shown, the number next to it if there is one, and the boiler model (on the rating plate).
- Check that enough radiators are open.
- Bleed the radiators, then check the water pressure again.
- Does the code stay on or come back? Do not take anything apart: call us.
Nothing to do
This message belongs to the boiler's normal operation.
Call usChoose a real expert
Ecowatt is an approved Buderus System Partner: factory training in Germany, direct access to spare parts, one contact.
The variants of code 212
The meaning depends on the boiler: find yours below.
212
The flow or safety temperature sensors measure a temperature rise that is too fast
Information: nothing to do
GB192i
The boilers that show this code
What our technician checks
- The operating pressure and venting of the appliance and the system
- The water flow rate in the system
- The wiring and operation of the pump and the sensor involved, replaced if needed