System water pressure too low
Blocking: it retries by itself
The water pressure in the heating system is too low (the boiler also shows message A.11). The burner is blocked and the internal pump stops: no heating and no hot water until the pressure is restored.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Check the system pressure: if it is below 1.0 bar, top up with water or call us.
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show F.74?
Repair visit: 360 € excl. VAT (381.60 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code F.74
The meaning depends on the boiler: find yours below.
Hydraulic system pressure too low
What our technician checks
- Filling to the required pressure and bleeding (drain and refill if the message returns after 10 s)
- The tightness of all hydraulic connections
- The system pressure sensor, compared with an external gauge
- The expansion vessel pre-charge
- The set system pressure and its range