Skip to Content
Repair
Viessmann Fault code Viessmann
A3

Flue gas temperature sensor wrongly placed

Blocking: it retries by itself

The boiler checks that its flue gas temperature sensor sits correctly in the flue connection, in particular at commissioning, and this check has failed. The burner stays blocked until the sensor is put back in place and the check succeeds: the boiler waits for our technician.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show A3?

Repair visit: 360 € excl. VAT (381.60 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code A3

The meaning depends on the boiler: find yours below.

A3

Flue gas temperature sensor incorrectly positioned

Blocking: it retries by itself Vitodens 100-W B1HC, Vitodens 200-W B2HA, Vitodens 200-W B2HB, Vitodens 222-F B2SB, Vitodens 222-F B2TB, Vitodens 222-W B2LB, Vitodens 300-W B3HA, Vitodens 300-W B3HB

What our technician checks

  • The position of the flue gas temperature sensor in the flue connection
  • The sensor check, repeated several times if needed (Vitodens 100-W B1HC, 200-W B2HB, 222-W B2LB)
  • After the repair: power switch off and on again, and the commissioning finished

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.