Heating circuit 2 flow sensor open circuit
Blocking: it retries by itself
The flow temperature sensor of heating circuit 2, a circuit with a mixing valve, is open circuit. The boiler keeps running, but the mixing valve of that circuit closes: the rooms it heats may stay too cold.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show 48?
Repair visit: 360 € excl. VAT (381.60 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code 48
The meaning depends on the boiler: find yours below.
Open circuit of the flow temperature sensor of heating circuit 2 (with mixing valve)
Open circuit of the flow sensor of heating circuit M2
Open circuit of the flow sensor of heating circuit 2 (with mixing valve)
Open circuit of the flow temperature sensor of the heating circuit with mixing valve M2…
Open circuit flow sensor heating circuit M2
Open circuit of the flow sensor heating circuit M2
What our technician checks
- The flow temperature sensor of heating circuit 2 (mixing valve M2) and its plug
- Its resistance, compared with the curve (NTC 10 kΩ sensor), sensor replaced if it is far off