Skip to Content
Repair
Viessmann Fault code Viessmann
359

No ignition spark

Breakdown: the boiler is stopped

When the burner starts, the ignition gives no spark: the burner cannot light. The burner locks out and the boiler only starts again after a reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 359?

Repair visit: 360 € excl. VAT (381.60 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 359

The meaning depends on the boiler: find yours below.

359

No ignition spark

Breakdown: the boiler is stopped Vitodens 100-W B1HF

What our technician checks

  • The insulation of the ignition electrode (damage)
  • The 230 V supply at the igniter during the ignition phase; without it, the HBMU central electronic module to be replaced
  • The igniter, to be replaced if it gets 230 V and the fault still occurs
  • The connection and link cables of the igniter and the ignition electrode

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.